In order to obtain high-quality results, it is necessary to respect the legalities of the profession and establish a flawless protocol communication between the practice/clinic and the dental laboratory. The works shown below are the result of a joint effort to revive the above mentioned rule by all participants in the therapy process.
CASE 1 – Tooth 11: veneer in feldspathic ceramic Creation CC
In this case of tooth reconstruction by making a veneer, direct layering of feldspathic ceramic Creation CC on the refractory die was the ideal choice of material i technique. Although extremely delicate, this was the only way to ensure a consistent imitation of colour and all other characteristics of the tooth structure.
CASE 2 – Teeth 11 and 21: crowns layered with Creation ZI-CT ceramic on ZrO2
In this case of teeth restoration, we used zirconium dioxide base layered with Creation ZI-CT ceramic.
CASE 3 – Tooth 12: e.max Press crown and tooth 11: veneer in feldspathic ceramic Creation CC
In this reconstruction of positions 11 and 12, we used different materials and techniques. There is a veneer in feldspathic ceramic Creation CC on the refractory die, on tooth 11 that was minimally prepared, giving a strong natural impression, and on tooth 12 there is a lithium disilicate crown layerd with Ivoclar e.max ceramic. The right selection of materials, conditioned by low value colour of tooth 12, as well as its correct application, have led to a very good end result.
CASE 4 – Teeth 11 and 22: veneers in feldspathic ceramic Creation CC
Due to the old composite fillings on teeth 11 and 22, it was necessary to make veneers. Directly layered feldspathic ceramic has copied the colour and all inner structures of teeth with extreme high quality.
CASE 5 – Tooth 11: veneer in feldspathic ceramic Creation CC using eLAB protocol
Atypical position of the natural tooth 11 has conditioned the decision to create a veneer in order to fith the tooth into a natural arch. Tooth colour choice was made using the eLAB protocol and the work was done with feldspathic ceramic on the refractory die technique.
CASE 6 – Tooth 21: crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB protocol
We supplied tooth 21 with a dioxide crown. The problem in this case was the lack of space to layer the ceramics from the vestibular side. The tooth itself was laid outside of the arch and could not be further prepared. In this case we used eLAB protocol in selecting the primary tooth colour, as well as a tool to control (measure) the colour in all stages of ceramics baking to achieve the above result.
CASE 7 – Tooth 21: crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB protocol
The case of position 21 has been reconstructed with a zirconium dioxide crown and layering Creation ZI-CT ceramic, with the use of eLAB technology in order to predict and achieve the planned result.
CASE 8 – Tooth 11: crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB protocol
The old crown on tooth 11 was replaced with zirconium dioxide ceramic layered crown. eLAB digital tools were used in shade matching. The challenege in this case was to imitate the accentuated internal structures – mamelons in the incisal side of the tooth. eLAB digital try in was of great help in this case, enabling us to check that we are on the right path during all stages of work.
CASE 9 – Tooth 22: crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB protocol
At the position 22, we replaced the old crown with a new one. The metal post presented a special challenge, as we had to block it with opaque material so it would not shine through into the tooth colour. We used entirely white zirconium dioxide layered with ceramic. Colour assessment was done using the eLAB system that offers us two recipes for dentin, which was very important in this case because we had to mimic the sclerotic changes occuring in it over the years.
CASE 10 – Tooth 21: crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB protocol
In this case, we supplied tooth 21 with a new zirconium dioxide ceramic layered crown. Assessing colour with eLAB has given us a recipe for an individualised dentin and enabled a predictable result.
Case 11 – Teeth 17-26: crowns and bridges layered with Creation ZI-CT ceramics on ZrO2
In this case, we did a complete reconstruction of the upper jaw 17-26 with crowns and bridges on a zirconium dioxide base. The patient’s cooperation, who wanted to keep the characteristic shape and the most natural appearance of her teeth, as well as the effort of all participants in this therapy led to this exceptional result.
Case 12 – Teeth 17-26: crowns layered with Creation ZI-CT ceramics on ZrO2 + teeth 45-47 and 34-37: bridges layered with Creation CC ceramics on Co-Cr alloy
In this case, we reconstructed the upper teeth on positions 17-26 with metal-free crowns and bridges on ZrO2 bases that are entirely layered with ceramics in order to achieve superior functionality and aesthetics in this demanding work. The teeth are conected and thus stabilized in the long run eliminating the progressive periodontal problems. The lower jaw 45-47 and 34-37 is done with metal ceramic bridges.
CASE 13 – Teeth 15-25: veneers in feldspathic ceramic Creation CC
A complex therapy by which we completely transformed the aesthetics of the smile. In this case, the gingiva was too visible (gummy smile), and it’s correction required surgery. Proper surgery planning was done through the wax-up and mock-up method. After the completion of tissue healing, the patient was provided with a minimally invasive prosthetic method of tooth preparation with ten very thin feldspathic ceramic veneers.
CASE 14 – Teeth 21 and 22: crowns layered with Creation ZI-CT ceramic on ZrO2 using eLAB Protocol
In this case, we replaced the od prosthetic work with a new one. The material used for the reconstruction is zirconium dioxide layered with ceramic. In order to fully imitate the teeth on the right side in their shape, texture and colour, we application the eLAB Protocol technology and achieved this exceptionally good result.
CASE 15 – Teeth 12 and 22: veneers in feldspathic ceramic Creation CC using eLAB Protocol
The Patient was dissatisfied with the irregular shape of the lateral incisors so we decided to reshape them using very thin feldspathic ceramic veneers without any tooth preparation. eLAB Protocol was used to assess the correct tooth colour and achieve superior aesthetics.
CASE 16 – Upper Jaw: All-on-4
The patient lost a large number of teeth due to long-term advanced periodontal issues and it was repaired with an All-on-4 work.
CASE 17 – Teeth 12-22 : veneers in feldspathic ceramic Creation CC
Feldspathic ceramic can meet the highest aesthetic requirements. In this case, after orthodontic therapy and minimal preparation, the patient’s incisors were restored using extremely thin veneers made of this material.
CASE 18 – Tooth 21 : implant crown layered with Creation ZI-CT ceramic on ZrO2
Replacing a fractured frontal tooth crown is always demanding. This highly aesthetic work on the implant with Creation ZI-CT ceramic was achieved using the eLAB Protocol.
CASE 19 – Tooth 11 : crown layered with Creation ZI-CT ceramic on ZrO2 using eLAB Protocol
The eLAB Protocol has proved to be an excellent tool in controlling the tooth colour during the work process in this case as well. Thus, the central incisor was successfully treated with this crown of superior aesthetics.
CASE 20 – Teeth 11 and 21: veneers in feldspathic ceramic Creation CC
The fracture of the incisor’s incisal edges and the existing diastema were treated by making very thin feldspathic ceramic veneers, thus giving back the patient a complete appearance of the teeth and the aesthetics of her/his smile.
CASE 21 – Tooth 11 : veneer in feldspathic ceramic Creation CC using eLAB protocol
In this case, a very thin feldspathic ceramic veneer was placed on the central incisor with no tooth preparation, which completely imitated the colour and shape of the adjacent tooth.
CASE 22 – Teeth 21 and 24: crowns layered with Creation ZI-CT ceramic on ZrO2 usingthe
eLAB Protocol
Due to the tooth devitalization and extensive fillings that resulted in discoloration of teeth 21 and 24, they were provided with highly aesthetic crowns, which were completely layered with ceramicsfollowing the eLAB software recipe.
CASE 23 – Teeth 11 and 21: crowns layered with Creation ZI-CT ceramic on ZrO2 using the eLAB Protocol
The old crowns on the central incisors were replaced with new ones using a ZrO2 base, which we additionally blocked to prevent the dark colour of the diefrom showing through the ceramic layers. This resulted in a natural aesthetic look.
CASE 24 – Tooth 11: crown layered with Creation ZI-CT ceramics on ZrO2 using the eLAB Protocol
The patient’s old crown was replaced. A new crown was made using the eLAB Protocol to fully replicate the demanding tooth colour and its structural characteristics.
CASE 25 – Tooth 11: Crown layered with Creation ZI-CT ceramics on ZrO2 using the eLAB Protocol
In this case of the anterior crown, the decision has been made to layer the ceramic on a ZrO2 base, as this was the best way to achieve the perfect “value”, as well as for the crown to fully integrate into the existing structure.
CASE 26 – Tooth 21: Creation CC feldspathic ceramic veneer using the eLAB Protocol
A vital tooth has been restored after trauma with a feldspathic ceramic veneer layered on a refractory die. In this case, it was the best choice of material in order to meet the demanding aesthetic standards.
CASE 27 – Teeth 12 and 21: crowns layered with Creation ZI-CT ceramic on ZrO2 + teeth 11 and 22: Creation CC feldspathic ceramic veneers, using the eLAB Protocol
A very demanding case in which two different materials and two techniques were reconciled. Vital teeth were spared with minimal preparation, and the dark colour of the base on vital teeth was blocked by the choice of material. The result is a uniform colour in a beautiful dental row.
CASE 28 – Teeth 13-23, 37-43 and 47: crowns layered with Creation ZI-CT ceramic on ZrO2 + teeth 14-17, 24-27 and 44-46: bridges layered with Creation ZI-CT ceramic on ZrO2 + individual titanium abutments – 14, 17, 24, 27
A complete reconstruction of the upper and lower jaw with vertical dimension elevation. Due to the tooth loss and a long period of edentulism, 4 implants were placed in the upper jaw to support the bridges. This rehabilitation restored the normal function of the chewing system.